ACCELMOVE DYNAMICS

Sale!

Raspberrypi Bot

20,000.00 10,000.00 (Limited Period Offer!!!)

  • Learn Robotics using Raspberry pi , Python  and become a Master of Pi Robotics .
  •  Learn Raspberry pi from zero to advanced.
  •  Provided  e-learning book that will take you from nothing to everything in doing   Raspberry pi projects .
  •  Python language is used for coding . Perfect for beginners to start learning.
  •  Starting from basic projects to integrating  sensors like Bluetooth Robot with camera streaming, Autonomous Robot, Line following , Ball tracking Robot etc can be built using this amazing kit.

 

In Stock

Category:
Build various Robotics projects including obstacle avoiding robot, Keyboard -controlled robot, Light Following Robot, Escape Robot, Line Following Robot, Autonomous Robot etc..

Projects Learned

Session 1 Hello World.
Session 2 Turning on and off LED & buzzer.
Session 3 LED and Buzzer blink.
Session 4 LED and Buzzer with Push Button.
Session 5 PWM control of led and buzzer.
Session 6 Generate tones.
Session 7 Automatic Street light.
Session 8 Line follower module.
Session 9 Ultrasonic Sensor.
Session 10 Interfacing Ultrasonic sensor with led and buzzer.
Session 11 Servo Motor with software PWM.
Session 12 Servo Motor with hardware PWM.
Session 13 Interfacing Line follower and Servo motor.
Session 14 Interfacing Ultrasonic Sensor and Servo motor.
Session 15 Display image on oled.
Session 16 Display shapes on oled.
Session 17 Show animation on oled.
Session 18 Display IP address and image on oled.
Session 19 Remote control led & buzzer.
Session 20 Motor Driver.
Session 21 Obstacle avoiding Robot.
Session 22 Keyboard Controlled Robot.
Session 23 Smart Phone Controlled LED & buzzer.
Session 24 Joystick.
Session 25 Smart Phone Controlled Robot.
Session 26 Remote controlled Robot.
Session 27 Light Following Robot.
Session 28 Escape Robot.
Session 29 Line Following Robot.
Session 30 Autonomous Robot.
Session 31 Obstacle avoiding Robot Interface with Oled.
Session 32 Keyboard controlled Robot Interface with Oled.
Session 33 Smart Phone controlled Robot Interface with Oled.
Session 34 Light Following Robot Interface with Oled.
Session 35 Escape Robot Interface with Oled.
Session 36 Line Following Interface with Oled.
Session 37 Autonomous Robot Interface with Oled.

Whats Included in Kit

  1.  L298 high watt motor driver.
  2.  Breadboard 
  3.  Ultrasonic sensor
  4.  Servo motor
  5.  DC Motor and wheels
  6.  Resistor
  7.  LED
  8.  Potentiometer
  9.  Chassis and Nuts & Bolts,DHT11
  10.  Castor Wheel
  11.  Push Button
  12.  LDR
  13.  Programming Cable
  14.  Battery Holder (AA battery not included)
  15.  Jumper Wire
  16.  Buzzer
  17.  Motor with wires.

Safety Information

To avoid malfunction of or damage to this product, please observe the
following:

  • Do not expose to water or moisture, or place on a conductive surface whilst
    in operation.
  •  Do not expose to heat from any source; the Raspberry Pi 3 Model B+ is
    designed for reliable operation at normal ambient temperatures.
  •  Take care whilst handling to avoid mechanical or electrical damage to the
    printed circuit board and connectors. Whilst it is powered, avoid handling
    the printed circuit board, or only handle it by the edges to minimise the
    risk of electrostatic discharge damage.

Warnings :

  • This product should only be connected to an external power supply rated
    at 5V/2.5 A DC.
  • Any external power supply used with the Raspberry Pi 3 Model B+ shall
    comply with relevant regulations and standards applicable in the country
    of intended use.
  • This product should be operated in a well-ventilated environment and, if
    used inside a case, the case should not be covered.
  • Whilst in use, this product should be placed on a stable, flat, nonconductive
    surface and should not be contacted by conductive items.
  • The connection of incompatible devices to the GPIO connection may
    affect compliance, result in damage to the unit, and invalidate the
    warranty.
  •  All peripherals used with this product should comply with relevant
    standards for the country of use and be marked accordingly to ensure that
    safety and performance requirements are met. These articles include but
    are not limited to keyboards, monitors, and mice when used in
    conjunction with the Raspberry Pi.
  • The cables and connectors of all peripherals used with this product must
    have adequate insulation so that relevant safety requirements are met.

Reviews

There are no reviews yet.

Be the first to review “Raspberrypi Bot”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Be the first to review “Raspberrypi Bot”

Your email address will not be published. Required fields are marked *